Asanplast Engineers Private Limited

Technical Specification

Description	Pipe / Body		Flanges
Description	Dimension	Grade	Dimension	Grade
Straight Lengths	ANSI B36.10 Sch 40 up to 150 NB	ASTM A106 Gr B	As per requirement	IS 2062 Gr B
One Fixed and Other End Loose Flange	ANSI B 16.5	ASTM A 234 Gr WPB	As per requirement	IS 2062 Gr B
Elbow 90°	ANSI B 16.5	ASTM A 234 Gr WPB	As per requirement	IS 2062 Gr B
Elbow 45°	ANSI B 16.5	ASTM A 234 Gr WPB	As per requirement	IS 2062 Gr B
Equal & Unequal Tees & Crosses (Welded Construction)	ANSI B 16.5	Fabricated from Pipes ASTM A106 Gr B Sch 40	As per requirement	IS 2062 Gr B
Concentric Reducers	ANSI B 16.5	ASTM A 234 Gr WPB	As per requirement	IS 2062 Gr B
Eccentric Reducers	ANSI B 16.5	ASTM A 234 Gr WPB	As per requirement	IS 2062 Gr B
Reducing Flanges	ANSI B 16.5	ASTM A 234 Gr WPB	As per requirement	IS 2062 Gr B

PTFE resin used conforms to ASTM D 1457 or ASTM D 4894

Make : We use PTFE from the following manufacturers :

We use isostatic molding method for manufacturing Pipe liners, lining of Fittings and Valves Lining material used for all our products - PTFE.

Lining thickness for Pipes and Fittings are as prescribed in ASTM F 1545 or greater

All Pipes and Fittings supplied are suitable for vacuum application and upto 10kg/sq.cm

INSPECTION AND TESTING

Inspection of Lining by 10 kv.A Spark Test

Hydraulic Pressure Test at 10 kg / sq cm

Additional Air Leakage Test at 3 kg / sq cm

Protective Coating

For pipes and fittings two coats of red oxide primer as standard